Digi TransPort LR54 - Cloud

Command reference cloud
Digi TransPort WR Routers User Guide
360
cloud
Configures Digi Remote Manager settings.
Syntax
cloud <parameter> <value>
Parameters
state
Enable or disable Digi Remote Manager.
Value is either on or off. The default value is on.
server
The name of the Digi Remote Manager server.
Value should be a fully qualified domain name. The default value is my.devicecloud.com.
reconnect
The time, in seconds, between the device's attempts to connect to Digi Remote Manager.
Accepted value is any integer from 10 to 3600. The default value is 30.
keepalive
The interval, in seconds, used to contact the server to validate connectivity over a non-cellular
interface.
Accepted value is any integer from 10 to 7200. The default value is 60.
keepalive-cellular
The interval, in seconds, used to contact the server to validate connectivity over a cellular interface.
Accepted value is any integer from 10 to 7200. The default value is 290.
keepalive-count
Number of keepalives missed before the device disconnects from Remote Manager.
Accepted value is any integer from 2 to 10. The default value is 3.
health
Enable or disable health metric reporting to Digi Remote Manager.
Value is either on or off. The default value is on.
health-sample-interval
The time, in minutes, between health metric samples.
Accepted values can be one of 1, 5, 15, 30 or 60. The default value is 60.