show firewall6
Digi TransPort WR Routers User Guide
440
show firewall6
Displays the firewall status and statistics. By default, all firewall tables are displayed. To display
individual tables, specify the table name on the show firewall6 command. In the command output, the
policy for each chain is also displayed in brackets after the chain name. The firewall keeps a counter
for each rule which counts the number of packets and bytes that have been matched against the rule.
This is a useful tool to determine if a rule is correctly detecting packets. To clear the counters, use the
'clear firewall6' command.
Parameters
filter
The currently defined filter table for IPv6.
mangle
The currently defined mangle table for IPv6.
To Next Page
Loading...
