Digi TransPort LR54 - Delete a WAN

Wide Area Networks (WANs) Delete a WAN
Digi TransPort WR Routers User Guide
66
Mask : 255.255.255.0
Gateway : 10.52.18.1
DNS Server(s) : 8.8.8.8
Probes are not being used
Received Sent
-------- ----
Packets 8356 640
Bytes 673351 64841
digi.router>
If IP probing is on, but the device has not yet received any replies, the output is similar to the
following:
digi.router> show wan 1
WAN 1 Status and Statistics
---------------------------
WAN Interface : eth1
Admin Status : Up
Oper Status : Up
IP Address : 10.52.18.120
Mask : 255.255.255.0
Gateway : 10.52.18.1
DNS Server(s) : 8.8.8.8
Probing : 10.52.18.1
Waiting for first response
Received Sent
-------- ----
Packets 8356 640
Bytes 673351 64841
Delete a WAN
Web
1. On the menu, click Network > Networks > WANs. The WANs page appears.
2. On the WAN page, select the WAN to delete.
3. Click Delete.
Command line
You cannot delete a WAN using the command line. Instead, disable the WAN using the wan n state off
command, for example:
wan 1 state off