Command reference gre
Digi TransPort WR Routers User Guide
380
gre
Configures a GRE tunnel.
Syntax
gre <1 - 10> <parameter> <value>
Parameters
state
Enables or disables this GRE tunnel.
Value is either on or off. The default value is off.
description
A description of this GRE tunnel.
Accepted value is any string up to 255 characters.
ip-address
IPv4 address for this GRE interface.
Value should be an IPv4 address.
mask
IPv4 subnet mask for this GRE interface.
Value should be an IPv4 address.
peer
Remote peer for this GRE interface.
Value should be an IPv4 address.
key
The key to use for this GRE tunnel.
Accepted value is any string up to 10 characters.