Digi TransPort LR54 - Show System Information; System Date and Time

System settings Show system information
Digi TransPort WR Routers User Guide
233
Show system information
You can view the system information from either the Dashboard of the Web interface, or from the
command line:
Web
1. On the menu, click Dashboard.
2. In the Device section of the dashboard, view the system information. For descriptions of these
fields, see the show system command description.
Command line
To show system information, use the show system command. For example:
digi.router> show system
Model : LR54W
Part Number : LR54-AW401
Serial Number : LR000130
Hardware Version : 50001899-03 A
Using Bank : 0
Firmware Version : 1.0.0.3-90c4383 06/19/16 20:31:29
Bootloader Version: v1.0.0.2
Using Config File : config.da0
Uptime : 4 Hours, 59 Minutes, 4 Seconds
System Time : 20 June 2016, 13:01:04
CPU : 3% (min 1%, max 60%, avg 2%)
Temperature : 33C
Description :
Location :
Contact :
digi.router>
System date and time
Configuring your TransPort device to use an accurate date and time is important for various functions
that the device performs, such as validating certificates, and using accurate timestamps on events in
the event log. Your TransPort device has three different mechanisms for configuring and maintaining
accurate system time:
n NTP server: In this configuration, hosts that are attached to the device's Local Area Networks
can synchronize their system date and time to the device's NTP server, while the device itself
synchronizes its system date and time to one or more upstream NTP servers. See Network
Time Protocol for further information.
n SNTPclient: In this configuration, the device synchronizes its system date and time to an NTP
server. See Network Time Protocol for further information.