Digi TransPort LR54 - Lan

Command reference lan
Digi TransPort WR Routers User Guide
391
lan
Configures a Local Area Network (LAN). A LAN is a group of Ethernet and Wi-Fi interfaces.
Syntax
lan <1 - 10> <parameter> <value>
Parameters
state
Enables or disables a LAN.
Value is either on or off. The default value is off.
description
A descriptive name for the LAN.
Accepted value is any string up to 63 characters.
mtu
Maximum Transmission Unit (MTU) for the LAN.
Accepted value is any integer from 128 to 1500. The default value is 1500.
interfaces
The physical interfaces for the LAN.
Accepted values can be multiple values of none, eth1, eth2, eth3, eth4, wifi-ap1, wifi-ap2, wifi-ap3, wifi-
ap4, wifi-ap5, wifi-ap6, wifi-ap7 and wifi-ap8. The default value is none.
ip-address
IPv4 address for the LAN. While it is not strictly necessary for a LAN to have an IP address, an IP
address must be configured to send traffic from and to the LAN.
Value should be an IPv4 address.
mask
IPv4 subnet mask for the LAN.
Value should be an IPv4 address. The default value is 255.255.255.0.
dns1
Preferred DNS server.
Value should be an IPv4 address.
dns2
Alternate DNS server.
Value should be an IPv4 address.