Digi TransPort LR54 - Delete a Port Forwarding Rule; Enable or Disable a Port Forwarding Rule

Services and applications Port forwarding
Digi TransPort WR Routers User Guide
159
Delete a port forwarding rule
Web
To delete one or more port forwarding rules:
1. On the menu, click Network > Services > Port Forwarding. The Port Forwarding page
appears.
2. Select the rule you want to remove, and click .
3. Click Apply.
Command line
You cannot delete a port forwarding rule using the command line, but you can disable a port
forwarding rule using the port-forward command.
For example:
digi.router> port-forward 4 state off
digi.router> save config
Enable or disable a port forwarding rule
Web
To enable or disable a port forwarding rule:
1. On the menu, click Network > Services > Port Forwarding. The Port Forwarding page
appears.
2. For each rule, use the slider on the Enabled field to enable or disable the rule as needed.
3. Click Apply.
Command line
To enable or disable a port forwarding rule, use the port-forwardstate parameter.
For example, to enable port forwarding rule 4:
digi.router> port-forward 4 state on
digi.router> save config
To disable port forwarding rule 4:
digi.router> port-forward 4 state off
digi.router> save config