Digi TransPort LR54 - RADIUS Page

Web reference RADIUS page
Digi TransPort WR Routers User Guide
334
RADIUS page
Use the RADIUS server page to create or modify RADIUS servers.
Settings options
Option Description
Enable Enable or disable RADIUS authentication for system administrators.
The value is either on or off. The default is off.
NASID A unique identifier for this network access server (NAS). You can use the fully-
qualified domain name of the NAS or any arbitrary string.
The accepted value is any string up to 64 characters.
If left blank, the default value of sshd is sent out.
Local Auth
Fallback
Determines whether to use local authentication if the RADIUS server does
not respond before the timeout expires.
The value is either on or off. The default value is on.
Debug Enable or disable additional debug messages from the RADIUS client. These
messages are added to the system log.
The value is either on or off. The default value is off.
Primary Server Settings
Option Description
Primary Server The IP address or fully-qualified domain name of the RADIUS server
to use to authenticate system administrators.
The value should be a fully qualified domain name.
Primary Server Port The UDP port number for the RADIUS server.
The accepted value is any integer from 1 to 65535. The default value
is 1812.
Primary Server Secret The shared secret for the RADIUS server. The secret cannot contain
spaces.
The accepted value is any string up to 64 characters.
Primary Server Timeout The amount of time in seconds to wait for the RADIUS server to
respond.
The accepted value is any integer from 1 to 10. The default value is 3.