Digi TransPort LR54 - (Revert Command Settings)

Command reference ! (Revert command settings)
Digi TransPort WR Routers User Guide
350
! (Revert command settings)
Reverts an individual command element to its default.
For example, to revert the default setting of interfaces on the lan command, enter:
digi.router> lan 1 interfaces !
To use the ! character in a parameter value, enclose it within " characters. For example, to reset the
Wi-Fi SSID to the default (blank):
wifi 1 ssid !
To set the Wi-Fi SSID to !abc:
wifi 1 ssid "!abc"