Security Local users
Digi TransPort WR Routers User Guide
75
Access level Permissions allowed
super The user can manage all features on TransPort devices. Devices can have
multiple users with super access level.
At least one user on each device must have a super access level to allow
editing user access levels. If you or any other user deletes the only user
with super access level, you must restore the default user configuration
by resetting the device to factory defaults.
read-write The user can manage all device features except security-related features,
such as configuring user access, configuring firewalls, clearing logs, and
so on.
read-only The user can view device configuration and status, but cannot change the
configuration or status.
Configure a user
To add, modify, or delete a user, you must be assigned the super access level. See User access levels
for descriptions of user access levels.
To configure a user, you need to configure the following:
Required configuration items
n A username, up to 32 characters long.
n A password, from 1-128 characters long. For security reasons, passwords are stored in hash
form. There is no way to get or display passwords in clear-text form.
Additional configuration items
n User access level. The default access level for users is super. To restrict access for a user,
assign either read-write or read-only. See User access levels for descriptions of user access
levels.
Web
1. Click Security > Authentication > Local Users. The User Management page appears.
2. Click New User.
Note When you add a new user using the web interface, TransPort creates a new user with the
next available index number. When you create a new user using the command line, you cannot
set or change the user index number assigned to a user.
To Next Page
Loading...
