Digi TransPort LR54 - Location-Client

Command reference location-client
Digi TransPort WR Routers User Guide
394
location-client
Configure location data that will be forwarded to a remote host, and identify the remote host.
Syntax
location-client <1 - 10> <parameter> <value>
Parameters
description
Description for remote host that will receive location data.
Accepted value is any string up to 255 characters.
server
Server address for the remote host.
Value should be a fully qualified domain name.
server-port
Server port for the remote host.
Accepted value is any integer from 0 to 65535. The default value is 0.
type
Protocol type for location data being forwarded.
Accepted values can be one of taip or nmea. The default value is taip.
filter-nmea
Specifies which NMEA messages to send.
Accepted values can be multiple values of gga, gll, gsa, gsv, rmc and vtg. The default value is
gga,gll,gsa,gsv,rmc,vtg.
filter-taip
Specifies which TAIP messages to send.
Accepted values can be multiple values of al, cp, id, ln and pv. The default value is al,cp,id,ln,pv.
prepend
Text to prepend to outgoing messages. '%s' translates to this device's serial number. '%v' translates
to the configured vehicle ID.
Accepted value is any string up to 32 characters. The default value is .