Digi TransPort LR54 - Qos-Queue

qos-queue
Digi TransPort WR Routers User Guide
418
qos-queue
Configures a QoS queue
Syntax
qos-queue <1 - 8> <parameter> <value>
Parameters
state
Enables or disables this QoS queue.
Value is either on or off. The default value is off.
description
A description of this QoS queue.
Accepted value is any string up to 255 characters.
bandwidth-upstream
Amount of bandwidth that is guaranteed to this queue in kbps. The sum of the guaranteed bandwidth
for all queues should not exceed the bandwidth of the slowest WAN with QoS enabled.
Accepted value is any integer from 0 to 1000000. The default value is 0.
borrow-upstream
Allow the queue to use additional bandwidth if there is any unused.
Value is either on or off. The default value is on.
dscp-class
Set the DSCP class of outbound packets using this queue.
Accepted values can be one of do-not-set, be, af11, af12, af13, af21, af22, af23, af31, af32, af33, af41,
af42, af43, ef, cs0, cs1, cs2, cs3, cs4, cs5, cs6 or cs7. The default value is do-not-set.