Digi TransPort LR54 - Clear Device ID; Dynamic Mobile Network Routing (DMNR); Configure Verizon DMNR

Routing Dynamic Mobile Network Routing (DMNR)
Digi TransPort WR Routers User Guide
182
Required configuration items
n Set web filter customer-specific token.
n Enable web filter.
Command line
1. Set the web filter token:
digi.router> web-filter token <your_client_token>
2. Enable the web filter:
digi.router> web-filter state on
3. Save the configuration.
digi.router> save config
Clear device ID
If the device ID on your TransPort appears to be invalid, you can clear the device ID by using the clear
web-filter-id command.
Command line
Clear the web filter ID:
digi.router> clear web-filter-id
Dynamic Mobile Network Routing (DMNR)
The Verizon Dynamic Mobile Network Routing (DMNR), based on the Network Mobility (NEMO)
protocol, provides dynamic routing support for mobile or stationary routers using IPv4 addressing.
n Configure Verizon DMNR
n Show DMNR status
Configure Verizon DMNR
Web
1. On the menu, click Network > Services > DMNR. The DMNR page appears.
2. Provide DMNR configuration options. See DMNR page for field descriptions.
3. Click Apply.
Command line
To configure DMNR, use the dmnr command. For example: