System settings Update system firmware
Digi TransPort WR Routers User Guide
241
3. Check that the firmware file has been successfully uploaded to the device.
digi.router> dir
File Size Last Modified
------------------------------------------------------
ssh_host_rsa_key.pub 382 Fri May 6 11:05:02
ssh_host_dsa_key.pub 590 Fri May 6 11:05:05
config.da0 1541 Mon May 23 12:32:22
config.fac 1760 Fri May 6 11:44:26
wr64-4.3.2.24.bin 52000149 Mon sept 5 22:17:59
Remaining User Space: 5,143,183,360 bytes
digi.router>
4. Update the firmware by entering the update command, specifying the firmware keyword and
the firmware file name.
digi.router> update firmware wr64-4.3.2.24.bin
Validating firmware image
Updating firmware from version "4.2.0.6" to version "4.3.2.24"
Firmware update completed. Please reboot the device.
digi.router>
5. Reboot the device to run the new firmware image using the reboot command.
digi.router> reboot
6. Once the device has rebooted, verify the running firmware version by entering the show
system command.
digi.router> show system
Model : WR64
Part Number : WR64-AW401
Serial Number : WR000038
Hardware Version : Not available
Using Bank : 1
Firmware Version : 4.3.2.24 09/05/2018 22:19:52
...
digi.router>
Certificate management for firmware images
The system firmware files are signed to ensure that only Digi-approved firmware load onto the device.
The TransPort device validates the system firmware image as part of the update process and only
successfully updates if the system firmware image can be authenticated.
To Next Page
Loading...
