Digi TransPort LR54 - Show WAN Ipv6 Status

IPv6 Show WAN IPv6 status
Digi TransPort WR Routers User Guide
72
digi.router> wan 1 ipv6-prefix-length 56
digi.router> save config
Show WAN IPv6 status
You can view IPv6 status WANs from either Web UI or the command line.
Web
1. On the menu, click Network > Networks > WANs. All configured WANs appear.
2. Select a WAN. The WAN display expands to show the configuration parameters and the status
and statistics for the interface assigned to the WAN. If IPv6 is enabled for the WAN and IPv6
addresses assigned to the WAN, the addresses display in the IPv6 Address field.
Command line
To show the IPv6 status on a WAN, use the show wan command. For example:
digi.router> show wan 2
WAN 2 Status and Statistics
---------------------------
WAN Interface : cellular1
Admin Status : Up
Oper Status : Up
IP Address : 100.67.98.174
Mask : 255.255.255.252
Gateway :
DNS Server(s) : 198.224.186.135, 198.224.187.135
IPv6 Address(es) : 2600:1000:b03e:7ae9:3038:63ff:fe47:4158/64 (Global)
fe80::3038:63ff:fe47:4158/64 (Link Local)
IPv6 DNS Server(s) : 2001:4888:12:ff00:106:d::, 2001:4888:13:ff00:123:d::
Probes are not being used
Received Sent
-------- ----
Packets 503 939
Bytes 104697 130536