Digi TransPort LR54 - Show Cellular Status and Statistics

Interfaces Cellular interfaces
Digi TransPort WR Routers User Guide
27
Web
1. On the menu, click Network > Interfaces > Cellular.
2. Select the cellular interface to edit (Cellular 1 or Cellular 2, and then select the SIM you want
to configure, for example SIM1 or SIM2.
3. In the Edit Selected box, provide configuration settings for the cellular interfaces. See
Interfaces—cellular page for details.
4. Click Apply.
Command line
1. Configure an APN.
digi.router> cellular 1 sim1-apn your-apn
2. If necessary, enter the APN username and password.
digi.router> cellular 1 sim1-apn-username your-apn-username
digi.router> cellular 1 sim1-apn-password your-apn-password
3. If necessary, enter the PIN for the SIM.
digi.router> cellular 1 sim1-pin your-sim-pin
4. Optional: Set the preferred mode.
digi.router> cellular 1 sim1-preferred-mode 3g
5. Optional: Set a description for the cellular interface.
digi.router> cellular 1 description “AT&T Connection”
6. Optional: Configure the number of connection attempts. For example, to set the number of
attempts to 10, enter:
digi.router> cellular 1 sim1-connection-attempts 10
7. Save the configuration.
digi.router> save config
Show cellular status and statistics
You can view a summary status for all cellular interfaces, or view detailed status and statistics for a
specific cellular interface, from either the web interface or the command line:
Web
1. On the menu, click Dashboard.
The Interface section of the dashboard shows the summary status of all interfaces.
2. Click on an interface, or click Network > Interfaces > Cellular to view detailed status and
statistics for each interface.