Hotspot Customize the hotspot login page
Digi TransPort WR Routers User Guide
136
lan lan2
local-page
local-shared-password
login local-page
mask 255.255.255.0
radius-nas-id hotspot
radius-secret
radius-server-port 1812
radius-server1
radius-server2
remote-url
server-port 4990
state on
swapoctets off
uamsecret
use-uamsecret off
digi.router>
Customize the hotspot login page
The TransPort device provides several sample HTML webpages for use with the hotspot feature. When
hotspot is enabled for the first time, the sample webpages are installed to the hotspot folder on the
device's filesystem. By default, the hotspot redirects users to one of the sample webpages based on
the authentication mode being used. See Hotspot authentication modes for information about which
HTML file is used for each authentication mode. The sample HTML webpages use ChilliLibrary.js to
perform authentication. Do not modify ChilliLibrary.js.
You can customize the sample HTML pages, or replace them with your own page, so that hotspot
users will be redirected to your custom HTML page when they log into the hotspot. You can also host
the HTML pages on an external web server, rather than on the TransPort device.
This section contains the following information:
To Next Page
Loading...
