Digi TransPort LR54 - Web-Filter

web-filter
Digi TransPort WR Routers User Guide
492
web-filter
Configures the web filtering service to be used for all WAN traffic. Use of a web filtering service like
Cisco Umbrella may provide content filtering, security, privacy, and monitoring features. If web
filtering is enabled, all DNS requests passing through the router are redirected to the selected web
filtering service, ensuring that computers on the LAN cannot bypass the web filter.
Syntax
web-filter <parameter> <value>
Parameters
state
Enables or disables the use of a web filtering service for all WAN traffic.
Value is either on or off. The default value is off.
service
Selects the web filtering service that the router uses for all WAN traffic.
Accepted values can be one of umbrella. The default value is umbrella.
token
The customer-specific API token for the Cisco Umbrella service. This token can be found on the Cisco
Umbrella dashboard under the Network Devices area. The router uses this token to automatically
obtain a device ID using the Network Device Registration API.
Accepted value is any string up to 255 characters.
dns1
Use the specified DNS server instead the default primary DNS server for the web filtering service. This
value should only be set if the web filtering service changes the IP addresses of their DNS servers
before Digi can release a software update that includes the new IP addresses.
Value should be an IPv4 address.
dns2
Use the specified DNS server instead the default secondary DNS server for the web filtering service.
This value should only be set if the web filtering service changes the IP addresses of their DNS servers
before Digi can release a software update that includes the new IP addresses.
Value should be an IPv4 address.