Interfaces Cellular interfaces
Digi TransPort WR Routers User Guide
28
Command line
Show summary status for cellular interfaces
To show the status and statistics for a cellular interface, use the show cellular command. See show
cellular for a description of the output fields.
digi.router> show cellular
SIM Status APN Signal Quality PIN Status
------------------------------------------------------------
1-1 Up broadband Excellent (-67dB) No PIN required
1-2 Down No PIN required
2-1 Down 12655.mcs Good (-90dB) No PIN required
2-2 Down No PIN required
digi.router>
Show detailed status and statistics for a cellular interface
To show the status and statistics for a particular cellular interface, enter show cellular and specify the
cellular module for which you want to show status.
digi.router> show cellular 1
Cellular Status and Statistics
------------------------------
Oper status : Up
SIM status : Using SIM2 (Ready)
SIM1 PIN : PIN is OK
SIM2 PIN : PIN is OK
Signal strength : Fair (-108dB)
Signal quality : Fair to Poor (-14dB)
Module : Telit LM940
Firmware version : 24.01.501 / Verizon 24.01.521
Hardware version : 0.04
Temperature : 35C
IMEI : 354375090000272
IMSI : 311480264298668
ICCID : 89148000002636797356
Registration status : Registered
Attachment status : Attached
Phone number : 6122973200
Network provider : Verizon
PLMN : 311480
Location : TAC = 3802 CID = DACB03
Roaming Status : Home
Connection type : 4G
Radio Technology : LTE
Preferred Technology : Automatic
Band : B13
Channel : 5230
APN in use : Context 3: vzwinternet
IP address : 100.103.109.8
Mask : 255.255.255.240
Gateway : 100.103.109.9
DNS Servers : 198.224.186.135, 198.224.187.135
TX Bytes : 1440
RX Bytes : 890
digi.router>
To Next Page
Loading...
