Digi TransPort LR54 - Page 110

Hotspot Hotspot configuration
Digi TransPort WR Routers User Guide
110
n. The Allowed Domains and Allowed Subnets fields define the "white list" of
domains and subnets that unauthenticated clients are able to access. If Remote
URL has been selected for the Login type, the domain for the web server that is
being use to serve the remote HTMLfiles must be included in the white list defined
in these fields.
o. Click Apply.
2. Configure the hotspot LAN:
a. On the menu, click Network > Networks > LANs.
n If the LANselected for the hotspot already exists, select that LAN.
n If the LANselected for the hotspot does not exist:
i. Click New Network.
ii. For Select Network, select the LAN.
Most settings for the LAN's configuration are performed automatically when the
hotspot is created and cannot be changed here. You can view the configuration
settings in read-only mode. Only the interfaces and optional description field can be
changed.
b. For Interfaces, select the appropriate Ethernet and/or Wi-Fi interfaces for the
hotspot.
c. Click Apply.
3. Configure the hotspot's Wi-Fi interface:
Note If an Ethernet interface was added to the LAN, no configuration of the Ethernet interface
is required.
a. On the menu, click Network > Interfaces > Wi-Fi.
n If the access point selected as the Wi-FI interface for the hotspot's
LANalready exists, select that access point.
n If the access point selected as the Wi-FI interface for the for the hotspot's
LANdoes not exist
i. Click New Access Point.
ii. For Select Access Point, select the access point of the Wi-FI
interface that was selected for the LAN.
b. For SSID, type the SSID that will be used for this hotspot.
c. For Security, select None.
d. Enable Broadcast SSID.
e. Click Apply.
Command line
1. Enable and configure the hotspot for local shared password authentication:
a. Assign the appropriate LAN to the hotspot:
digi.router> hotspot lan lan3