Hotspot Hotspot configuration
Digi TransPort WR Routers User Guide
125
o. For Max Download and Max Upload, define the throughput limits that will be
applied to clients that connect to the hotspot. Enter the number and selected
either Kbps or Mbps. The default for both is 10 Mbps.
p. For DHCP Lease Length, enter the duration of the DHCP server lease in seconds.
The default is 600 seconds.
q. The Allowed Domains and Allowed Subnets fields define the "white list" of
domains and subnets that unauthenticated clients are able to access. Include the
domain or subnet of the RADIUS server(s) that are being used for authentication. If
Remote URL has been selected for the Login type, the domain for the web server
that is being use to serve the remote HTMLfiles must be included in the white list
defined in these fields.
r. (Optional) For Secondary RADIUS Server, enter the IP addres or fully qualified
domain name of a secondary RADIUSserver to be used if the primary
RADIUSserver is not reachable.
s. For RADIUS Server Port, enter the UDP port number for the RADIUS server. The
default is 1812.
t. (Optional) Enable Swap Octets to swap the meaning of the input octets/packets
and output octets/packets RADIUS attributes. This can fix issues if the data limits
and/or accounting reports appear to be reversed on the RADIUS server. The default
is disabled.
u. (Optional) Enable Use UAM Secret if required for integration with a cloud hotspot
provider.
v. For UAM Secret, if Use UAM Secret is enabled, enter the UAMsecret.
w. Click Apply.
2. Configure the hotspot LAN:
a. On the menu, click Network > Networks > LANs.
n If the LANselected for the hotspot already exists, select that LAN.
n If the LANselected for the hotspot does not exist:
i. Click New Network.
ii. For Select Network, select the LAN.
Most settings for the LAN's configuration are performed automatically when the
hotspot is created and cannot be changed here. You can view the configuration
settings in read-only mode. Only the interfaces and optional description field can be
changed.
b. For Interfaces, select the appropriate Ethernet and/or Wi-Fi interfaces for the
hotspot.
c. Click Apply.
3. Configure the hotspot's Wi-Fi interface:
Note If an Ethernet interface was added to the LAN, no configuration of the Ethernet interface
is required.
To Next Page
Loading...
