Digi TransPort LR54 - Page 185

Routing Quality of Service (QoS)
Digi TransPort WR Routers User Guide
185
WAN 3 and set the bandwidth upstream to 8000 kbps:
digi.router> wan 3 qos on
digi.router> wan 3 bandwidth-upstream 8000
digi.router> save config
n To configure one or more QoS queues use the qos-queue command. For example:
digi.router> qos-queue 1 description myhighqosqueue
digi.router> qos-queue 1 borrow-upstream on
digi.router> qos-queue 1 dscp-class be
digi.router> qos-queue 1 state on
digi.router> save config
digi.router> qos-queue 2 description mymediumqosqueue
digi.router> qos-queue 2 borrow-upstream off
digi.router> qos-queue 2 state on
digi.router> save config
digi.router> qos-queue 3 description mylowqosqueue
digi.router> qos-queue 3 borrow-upstream off
digi.router> qos-queue 3 state on
digi.router> save config
n To configure filters for a configured QoS queue, use the qos-filter command. For example:
digi.router> qos-filter 1 queue 1
qos-queue 1:
digi.router> qos-queue
qos-queue 1:
bandwidth-upstream 2000
borrow-upstream on
description VoIP Queue
dscp-class do-not-set
state on
qos-queue 2:
bandwidth-upstream 500
borrow-upstream on
description Video Streaming
dscp-class be
state on
digi.router> qos-filter