Digi TransPort LR54 - Page 202

Virtual Private Networks (VPN) IPsec
Digi TransPort WR Routers User Guide
202
1. Set the authentication mode to xauth-psk:
digi.router> ipsec 1 auth-by xauth-psk
2. Set the XAuth role to server:
digi.router> ipsec 1 xauth-role server
3. Configure the credentials that the XAuth client will use to authenticate to the device's XAuth
server
digi.router> xauth-user 1 username <user>
digi.router> xauth-user 1 password <password>
Up to ten XAuth clients can be configured.
4. Save the configuration:
digi.router> save config