Digi TransPort LR54 - Page 304

Web reference Interfaces—Wi-Fi page
Digi TransPort WR Routers User Guide
304
Option Description
Security Specifies the security type for the Wi-Fi interface: none, wpa2-personal, wpa-wpa2-
personal, wpa2-enterprise, or wpa-wpa2-enterprise. The default is wpa2-personal.
Password Specifies the password for the Wi-Fi interface. The password must be 8-63 ASCII or 64
hexadecimal characters. Enter a string up to 64 characters long.
Verify
password
Re-enter the password for the WiFi interface. The text you enter must match the text
you entered for Password.
Broadcast
SSID
Enables or disables broadcasting the SSID in beacon packets. Disabling the SSID
prevents clients from easily detecting the presence of this access point. The default
value is Enabled.
Isolation—
Client
Enables or disables Wi-Fi client isolation, which prevents clients connected to the Wi-Fi
access point from communicating with each other. The default value is Enabled.
Isolation—
Access
point
Enables or disables clients on a Wi-Fi access point from communicating with clients on
other Access Points. The default value is Enabled.
Client mode options
Option Description
SSID Specifies the Service Set Identifier (SSID) for the Wi-Fi interface. You can configure the
SSID to use the device serial number by including the percent (%) symbol in the SSID.
For example, an SSID value WR64_%s resolves to WR64_LR123456. Enter a string up to
32 characters long.
Security Specifies the security type for the Wi-Fi interface: none, WPA2 personal, WPA/WPA2
personal, WPA2 enterprise, or WPA/WPA2 enterprise. The default is WPA2-personal.
Username
For WPA2 enterprise and WPA/WPA2 mixed mode. Specifies the username for the Wi-Fi
network. Enter a string up to 64 characters long.
Password Specifies the password for the Wi-Fi interface. The password must be 8-63 ASCII or 64
hexadecimal characters. Enter a string up to 64 characters long.
Hidden
SSID
Enables or disables whether to scan for hidden SSID. The default is off.
In general, for both security and performance issues, Digi recommends you do not
enable the Hidden option.
Access point status and statistics
Option Description
Network Shows the network to which the Wi-Fi interface is assigned.
Admin status Shows whether the Wi-Fi access point is sufficiently configured to be brought up.
Oper status Shows whether the Wi-Fi access point is up or down.