Digi TransPort LR54 - Page 332

Web reference Quality of Service (QoS) queues page
Digi TransPort WR Routers User Guide
332
Field/Button Description
Src port
Specifies the port or ports for incoming packets. A port is an integer value
from 0 to 65535. Specify a single port, a list of ports, or a range of ports:
n To specify a list of ports, use a comma (,) to separate the ports in
the list. For example: 443,22,31.
n To specify a range of ports, use a colon (:) to separate the low and
high ports in the range. For example: 22:31.
The default is 0.
Dst IP
Specifies the IPv4 or IPv6 destination address of outgoing packets. Use a
simple IPv4 or IPv6 address or use CIDR notation. For example,
192.168.100.0/24, fe80::/10.
Dst port
Specifies the port or ports for outgoing packets. A port is an integer value
from 0 to 65535. Specify a single port, a list of ports, or a range of ports:
n To specify a list of ports, use a comma (,) to separate the ports in
the list. For example: 443,22,31.
n To specify a range of ports, use a colon (:) to separate the low and
high ports in the range. For example: 22:31.
The default is 0.
DSCP
Specifies one or more DSCP tags to filter incoming packets. Select one or
more DSCP categories or any. The default is any.