Digi TransPort LR54 - Page 342

Web reference Wide Area Network (WAN) page—Cellular
Digi TransPort WR Routers User Guide
342
Option Description
Timeout
Specifies the time, in seconds, to wait for the physical interface to connect and to
receive a probe response before failing over to a lower priority interface. Accepted
value is any integer from 10 to 3600. The default value is 180.
Status display
Option Description
Interface
Shows the interface for the WAN.
Admin status
Shows the administrative status for the WAN: Up or Down.
Oper status
Shows the operational status for the WAN: Up or Down.
IP address
Shows the IP address for the WAN.
Netmask
Shows the Netmask for the WAN.
Gateway
Shows the Gateway for the WAN.
DNS servers
Shows the DNS servers for the WAN.
IPv6
Shows whether IPv6 is enabled or disabled for the WAN.
Packets
Shows the number of received and sent packets for the WAN.
Bytes
Shows the number of received and sent bytes for the WAN.