Digi TransPort LR54 - Page 383

Command reference hotspot
Digi TransPort WR Routers User Guide
383
used for authentication, and any other sites that should be available inside the walled garden.
Subdomains underneath any of the domains listed here are also allowed.
Accepted value is any string up to 999 characters.
ip-address
The specified IPV4 address determines which IP the hotspot runs on as well as what IP addresses are
assigned to clients. This IPV4 address must not exist within a current subnet.
Value should be an IPv4 address. The default value is 10.1.0.1.
mask
IPV4 subnet mask for the hotspot to assign addresses within.
Value should be an IPv4 address. The default value is 255.255.255.0.
swapoctets
Swap the meaning of the input octets/packets and output octets/packets RADIUS attributes. This can
fix issues if the data limits and/or accounting reports appear to be reversed on the RADIUS server.
Value is either on or off. The default value is off.
uamsecret
Secret shared between the UAM server and the hotspot. This does not typically need to be set unless
integrating with a cloud hotspot provider.
Accepted value is any string up to 64 characters.
use-uamsecret
Allows the UAM secret to be used. This does not typically need to be set unless integrating with a
cloud hotspot provider.
Value is either on or off. The default value is off.
dhcp-lease
The number of seconds until a DHCP lease expires.
Accepted value is any integer from 60 to 1000000. The default value is 600.
allowed-subnets
A comma-separated list of subnets that are accessible to users that are not currently authenticated.
This list might include one or more remote servers that should be available inside the walled garden.
Subnets are specified in CIDR notation (an IP address followed by a slash and a decimal number
indicating the size of the subnet mask). Individual IP addresses can also be specified in this list. If a
domain name is specified in this list, the hotspot performs a DNS lookup to convert it to an IP address.
Accepted value is any string up to 999 characters.