Digi TransPort LR54 - Page 403

Command reference openvpn-server
Digi TransPort WR Routers User Guide
403
dh
The Diffie-Hellman parameters this OpenVPN server uses for shared secret generation. This file is in
PEM format and is often named 'dh2048.pem' or similar. Leave blank to use Elliptic Curve Diffie-
Hellman key exchange.
Accepted value is any string up to 63 characters.
cert
The public certificate for this OpenVPN server. This file is in PEM format and is often named 'server.crt'
or similar.
Accepted value is any string up to 63 characters.
key
The private key for this OpenVPN server. This file is in PEM format and is often named 'server.key' or
similar.
Accepted value is any string up to 63 characters.
radius-server
The IP address for the RADIUS server for OpenVPN.
Value should be an IPv4 address.
radius-server-port
The port for the RADIUS server.
Accepted value is any integer from 1 to 65535. The default value is 1812.
radius-server-secret
The secret for the RADIUS server.
Accepted value is any string up to 64 characters.
radius-server-state
Enables or disables RADIUS authentication.
Value is either on or off. The default value is off.
compression
The compression algorithm this OpenVPN server uses to compress data channel packets.
Accepted values can be one of off, lzo or lz4. The default value is off.
verb
Adjusts the amount of output that this OpenVPN server records in the system log. Set this parameter
to 0 to record only errors and warnings. Set this parameter to 3 to record a fairly complete activity
log.
Accepted value is any integer from 0 to 4. The default value is 0.
keepalive-interval
Sends a ping message if no other traffic is sent in either direction between the OpenVPN client and
server. This value is also pushed to the client. To disable the ping-based keepalive mechanism, set this