Digi TransPort LR54 - Page 420

radius
Digi TransPort WR Routers User Guide
420
debug
Enable or disable additional debug messages from the RADIUS client. These messages are added to
the system log.
Value is either on or off. The default value is off.
backup-server
The IP address or fully-qualified domain name of the backup RADIUS server to use to authenticate
system administrators when the main RADIUS server is not available.
Value should be a fully qualified domain name.
backup-server-port
The UDP port number for the backup RADIUS server.
Accepted value is any integer from 1 to 65535. The default value is 1812.
backup-server-secret
The shared secret for the backup RADIUS server. Secret can not contain spaces, an open bracket ([),
or a close bracket (]).
Accepted value is any string up to 64 characters.
backup-server-timeout
The amount of time in seconds to wait for the backup RADIUS server to respond.
Accepted value is any integer from 3 to 10. The default value is 3.