Digi TransPort LR54 - Page 509

Advanced topics Using the firewall command
Digi TransPort WR Routers User Guide
509
Chain FORWARD (policy ACCEPT 788 packets, 82764 bytes)
num pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 1646 packets, 110K bytes)
num pkts bytes target prot opt in out source destination
digi.router>
digi.router> clear firewall
Filter Table
------------
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 DROP tcp -- cellular1 any anywhere anywhere tcp dpt:22
2 0 0 DROP icmp -- lan1 any anywhere anywhere icmp echo-request
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
digi.router>