Local Area Networks (LANs) DHCP servers
Digi TransPort WR Routers User Guide
55
DHCP relay server failure
When a DHCP relay server is being used and connecting devices are unable to obtain an IP address
because the IP address is not accessible or there is a subnet conflict, a message will appear in the
system log similar to the following:
daemon.warning dnsmasq-dhcp[5446]: no address range available for DHCP request
via lan1
If the TransPort device successfully forwards a DHCP request but does not receive a reply from the
DHCP server, a static route may be required on the DHCP server's host to route the reply back to the
device.
To Next Page
Loading...
