Configuring the Switch
3-60
Copy HTTPS Certificate
•
TFTP Server IP Address – Specifies the TFTP Server where the authorized
certificate will be saved.
•
Source Certificate File Name – File name for the certificate.
•
Source Private File Name – Private key file name.
•
Private Password – Password for the private key.
Web – Click Security, HTTPS Settings. Enable HTTPS and specify the port number,
then click Apply. To replace the default secure-site certificate, enter the TFTP Server
IP Address, the Source Certificate File Name, the Source Private File Name, and the
Private Password, then click Copy Certificate.
Figure 3-31 HTTPS Settings
CLI – This example enables the HTTP secure server and modifies the port number.
Console(config)#ip http secure-server 4-86
Console(config)#ip http secure-port 441 4-87
Console(config)#exit
Console#copy tftp https-certificate 4-24
TFTP server ip address: <server ip-address>
Source certificate file name: <certificate file name>
Source private file name: <private key file name>
Private password: <password for private key>
Console#
To Next Page
Loading...
