Edge-Core ES4524M-POE

SNMP Commands
4-63
4
Default Setting
• public - Read-only access. Authorized management stations are only able to
retrieve MIB objects.
• private - Read-write access. Authorized management stations are able to both
retrieve and modify MIB objects.
Command Mode
Global Configuration
Example
snmp-server contact
This command sets the system contact string. Use the no form to remove the
system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server location (4-64)
Console(config)#snmp-server community alpha rw
Console(config)#
Console(config)#snmp-server contact Paul
Console(config)#