Multicast VLAN Registration
3-213
Web – Click MVR, Configuration. Enable MVR globally on the switch, select the
MVR VLAN, add the multicast groups that will stream traffic to attached hosts, and
then click Apply.
Figure 3-107 MVR Global Configuration
CLI – This example first enables IGMP snooping, enables MVR globally, and then
configures a range of MVR group addresses.
Console(config)#ip igmp snooping 4-253
Console(config)#mvr 4-262
Console(config)#mvr group 228.1.23.1 10 4-262
Console(config)#
To Next Page
Loading...
Need help?
General