Edge-Core ES4524M-POE

Command Line Interface
4-144
4
Example
show interfaces counters
This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
• port - Port number. (Range: 1-24)
• port-channel channel-id (Range: 1-8)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic information:
Port type: 1000T
Mac address: 00-30-F1-D4-73-A5
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full, 1000full
Broadcast Storm: Enabled
Broadcast Storm Limit: 64 Kbits/second
Multicast Storm: Disabled
Multicast Storm Limit: 64 Kbits/second
UnknownUnicast Storm: Disabled
UnknownUnicast Storm Limit: 64 Kbits/second
Flow Control: Disabled
LACP: Disabled
Port Security: Disabled
Max MAC Count: 0
Port Security Action: None
Media Type: None
Current Status:
Link Status: Up
Port Operation Status: Up
Operation Speed-duplex: 100full
Flow Control Type: None
Console#show interfaces status vlan 1
Information of VLAN 1
MAC Address: 00-16-B6-F0-3B-EC
Console#