LLDP Commands
4-229
4
Example
lldp medtlv network-policy
This command configures an LLDP-MED-enabled port to advertise its network
policy configuration. Use the no form to disable this feature.
Syntax
[no] lldp
medtlv network-policy
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises network policy configuration information, aiding in the
discovery and diagnosis of VLAN configuration mismatches on a port.
Improper network policy configurations frequently result in voice quality
degradation or complete service disruption.
Example
show lldp config
This command shows LLDP configuration settings for all ports.
Syntax
show lldp config [detail interface]
• detail - Shows configuration summary.
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-24)
• port-channel channel-id (Range: 1-8)
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#lldp medtlv med-cap
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#lldp medtlv network-policy
Console(config-if)#
To Next Page
Loading...
Need help?
General