Edge-Core ES4524M-POE

Command Line Interface
4-94
4
delete public-key
This command deletes the specified user’s public key.
Syntax
delete public-key username [dsa | rsa]
• username – Name of an SSH user. (Range: 1-8 characters)
• dsa – DSA public key type.
• rsa – RSA public key type.
Default Setting
Deletes both the DSA and RSA key.
Command Mode
Privileged Exec
Example
ip ssh crypto host-key generate
This command generates the host key pair (i.e., public and private).
Syntax
ip ssh crypto host-key generate [dsa | rsa]
• dsa – DSA (Version 2) key type.
• rsa – RSA (Version 1) key type.
Default Setting
Generates both the DSA and RSA key pairs.
Command Mode
Privileged Exec
Command Usage
• The switch uses only RSA Version 1 for SSHv1.5 clients and DSA Version 2
for SSHv2 clients.
• This command stores the host key pair in memory (i.e., RAM). Use the ip ssh
save host-key command to save the host key pair to flash memory.
• Some SSH client programs automatically add the public key to the known
hosts file as part of the configuration process. Otherwise, you must manually
create a known hosts file and place the host public key in it.
• The SSH server uses this host key to negotiate a session key and encryption
method with the client trying to connect to it.
Console#delete public-key admin dsa
Console#