User Authentication
3-77
Web – Click Security, IP Filter. Enter the addresses that are allowed management
access to an interface, and click Add IP Filtering Entry.
Figure 3-39 Filtering Management Access
CLI – This example restricts management access for Telnet clients.
Console(config)#management telnet-client 192.168.1.19 4-107
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console(config)#exit
Console#show management all-client 4-108
Management IP Filter
HTTP-Client:
Start IP address End IP address
-----------------------------------------------
SNMP-Client:
Start IP address End IP address
-----------------------------------------------
TELNET-Client:
Start IP address End IP address
-----------------------------------------------
1. 192.168.1.19 192.168.1.19
2. 192.168.1.25 192.168.1.30
Console#
To Next Page
Loading...
Need help?
General