Command Line Interface
4-232
4
show lldp info remote-device
This command shows LLDP global and interface-specific configuration settings for
remote devices attached to an LLDP-enabled port.
Syntax
show lldp info remote-device [detail interface]
• detail - Shows detailed information.
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-24)
• port-channel channel-id (Range: 1-8)
Command Mode
Privileged Exec
Example
Console#show lldp info remote-device
LLDP Remote Devices Information
Interface | ChassisId PortId SysName
--------- + ----------------- ----------------- ---------------------
Eth 1/1 | 00-01-02-03-04-05 00-01-02-03-04-06
Console#show lldp info remote-device detail ethernet 1/1
LLDP Remote Devices Information Detail
---------------------------------------------------------------
Local PortName : Eth 1/1
Chassis Type : MAC Address
Chassis Id : 00-01-02-03-04-05
PortID Type : MAC Address
PortID : 00-01-02-03-04-06
SysName :
SysDescr : SMC6128L2
PortDescr : Ethernet Port on unit 1, port 1
SystemCapSupported : Bridge
SystemCapEnabled : Bridge
Remote Management Address :
00-01-02-03-04-05 (MAC Address)
Console#
To Next Page
Loading...
Need help?
General