VLAN Commands
4-191
4
show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Displaying Basic VLAN Information” on page 3-160 and “Displaying
Bridge Extension Capabilities” on page 3-14 for a description of the displayed
items.
Example
switchport gvrp
This command enables GVRP for a port. Use the no form to disable it.
Syntax
[no] switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
Console#show bridge-ext
Max Support VLAN Numbers: 255
Max Support VLAN ID: 4094
Extended Multicast Filtering Services: No
Static Entry Individual Port: Yes
VLAN Learning: IVL
Configurable PVID Tagging: Yes
Local VLAN Capable: No
Traffic Classes: Enabled
Global GVRP Status: Disabled
GMRP: Disabled
Console#
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
To Next Page
Loading...
Need help?
General