Command Line Interface
4-20
4
Example
show users
Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The session used to execute this command is indicated by a “*” symbol next to
the Line (i.e., session) index number.
Console#show system
System Description: 24-port 10/100/1000 + 2-port mini-GBIC Gigabit PoE
Switch
System OID String: 1.3.6.1.4.1.259.8.1.7
System Information
System Up Time: 0 days, 0 hours, 7 minutes, and 48.43 seconds
System Name: [NONE]
System Location: [NONE]
System Contact: [NONE]
MAC Address (Unit1): 00-16-B6-F0-3B-EC
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Jumbo Frame: Disabled
POST Result:
Timer Test ................... PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Switch Int Loopback Test ..... PASS
Done All Pass.
Console#
To Next Page
Loading...
Need help?
General