Edge-Core ES4524M-POE

Command Line Interface
4-226
4
lldp dot3-tlv max-frame
This command configures an LLDP-enabled port to advertise its maximum frame
size. Use the no form to disable this feature.
Syntax
[no] lldp dot3-tlv max-frame
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Refer to “Frame Size Commands” on page 4-22 for information on configuring
the maximum frame size for the switch.
Example
lldp dot3-tlv poe
This command configures an LLDP-enabled port to advertise its
Power-over-Ethernet (PoE) capabilities. Use the no form to disable this feature.
Syntax
[no] lldp dot3-tlv power-via-mdi
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises Power-over-Ethernet capabilities, including whether or
not PoE is supported, currently enabled, if the port pins through which power
is delivered can be controlled, the port pins selected to deliver power, and the
power class.
Example
Console(config)#interface eth 1/1
Console(config-if)#lldp dot3-tlv maximum-frame-size
Console(config-if)#
Console(config)#interface eth 1/1
Console(config-if)#lldp dot3-tlv poe
Console(config-if)#