Edge-Core ES4524M-POE

Configuring the Switch
3-70
authentication type. (Some clients have native support in Windows, otherwise the
dot1x client must support it.)
Displaying 802.1X Global Settings
The 802.1X protocol provides client authentication.
Command Attributes
802.1X System Authentication Control – The global setting for 802.1X.
Web – Click Security, 802.1X, Information.
Figure 3-35 802.1X Global Information
CLI – This example shows the default global setting for 802.1X.
Console#show dot1x 4-104
Global 802.1X Parameters
system-auth-control: Disabled
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized n/a
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
802.1X Port Details
802.1X is disabled on port 1/1
.
.
.
802.1X is disabled on port 1/28
Console#