System Management Commands
4-21
4
Example
show version
This command displays hardware and software version information for the system.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
See “Displaying Switch Hardware/Software Versions” on page 3-13 for
detailed information on the items displayed by this command.
Example
Console#show users
Username Accounts:
Username Privilege Public-Key
-------- --------- ----------
admin 15 None
guest 0 None
steve 15 RSA
Online users:
Line Username Idle time (h:m:s) Remote IP addr.
----------- -------- ----------------- ---------------
0 console admin 0:14:14
* 1 VTY 0 admin 0:00:00 192.168.1.19
2 SSH 1 steve 0:00:06 192.168.1.19
Web online users:
Line Remote IP addr Username Idle time (h:m:s).
----------- -------------- -------- ------------------
1 HTTP 192.168.1.19 admin 0:00:00 (why empty?)
Console#
Console#show version
Unit 1
Serial Number: A622016012
Hardware Version: R01
EPLD Version: 11.09
Number of Ports: 24
Main Power Status: Up
Redundant Power Status: Not present
Agent (Master)
Unit ID: 1
Loader Version: 1.0.2.4
Boot ROM Version: 1.0.2.6
Operation Code Version: 1.0.0.5
Console#
To Next Page
Loading...
Need help?
General