LLDP Commands
4-233
4
show lldp info statistics
This command shows statistics based on traffic received through all attached
LLDP-enabled interfaces.
Syntax
show lldp info statistics [detail interface]
• detail - Shows detailed information.
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-24)
• port-channel channel-id (Range: 1-8)
Command Mode
Privileged Exec
Example
Consold#show lldp info statistics
LLDP Device Statistics
Neighbor Entries List Last Updated : 978725 seconds
New Neighbor Entries Count : 0
Neighbor Entries Deleted Count : 0
Neighbor Entries Dropped Count : 0
Neighbor Entries Ageout Count : 0
Port | NumFramesRecvd NumFramesSent NumFramesDiscarded
----- + -------------- ------------- ------------------
1 | 0 939 0
2 | 0 0 0
3 | 0 0 0
.
.
.
Consold#show lldp info statistics detail ethernet 1/1
LLDP Port Statistics Detail
PortName : Eth 1/1
Frames Discarded : 0
Frames Invalid : 0
Frames Received : 0
Frames Sent : 941
TLVs Unrecognized : 0
TLVs Discarded : 0
Neighbor Ageouts : 0
Console#
To Next Page
Loading...
Need help?
General