Edge-Core ES4524M-POE

Port Configuration
3-101
• Broadcast Storm Limit – Shows the broadcast storm threshold. (64 - 1,000,000
kilobits per second)
• Multicast Storm – Shows if multicast storm control is enabled or disabled.
• Multicast Storm Limit – Shows the multicast storm threshold. (64 - 1,000,000
kilobits per second)
• Unknown Unicast Storm – Shows if unknown unicast storm control is enabled or
disabled.
• Unknown Unicast Storm Limit – Shows the unknown unicast storm threshold.
(64 - 1,000,000 kilobits per second)
• Flow Control – Shows if flow control is enabled or disabled.
• LACP – Shows if LACP is enabled or disabled.
• Port Security – Shows if port security is enabled or disabled.
• Max MAC Count – Shows the maximum number of MAC address that can be
learned by a port. (0 - 1024 addresses)
• Port Security Action – Shows the response to take when a security violation is
detected. (shutdown, trap, trap-and-shutdown)
• Media Type – Shows the forced or preferred port type to use for combination ports
23-24. (copper forced, SFP forced, SFP preferred auto)
Current Status:
• Link Status – Indicates if the link is up or down.
• Port Operation Status – Provides detailed information on port state. (Displayed
only when the link is up.)
• Operation Speed-duplex – Shows the current speed and duplex mode.
• Flow Control Type – Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)