544 Eos Family Operations Manual
OSC
Method
Arguments Examples/Comments
Argument 3: Z 0.516 (pink color with 75% saturation)
Wheel
A wheel can be used to adjust channel levels and parameters.
OSC Method Arguments Examples/Comments
/eos/pantilt/xy
Argument 1: X (0.0-1.0) Argument 2: Y
(0.0-1.0)
For 2D Pan/Tilt graph where bottom-left corner is (0.0,
0.0) and top-right corner if (1.0, 1.0)
LevelWheel
/eos/wheel/level
number for wheel ticks for the specified
wheel mode (positive or negative)
/eos/wheel/level=1.0 (increase value)
/eos/wheel/level=-1.0 (decrease value)
/eos/wheel/level=4.0 (increase value rapidly)
(defaults to Coarse mode, but wheel mode can be
changed with the /eos/wheel command below)
/eos/wheel number for wheel mode: 0=coarse, 1=fine /eos/wheel=1.0
WheelOutput - see Implicit OSC Output for more information
/eos/out/wheel
number for current wheel mode:
0=coarse, 1=fine
/eos/out/wheel=1.0
Indexed Wheels- see ActiveParameters
/eos/wheel/<index>/level
number for wheel ticks for the specified
wheel mode (positive or negative)
/eos/wheel/2/level=1.0 (increase value)
/eos/wheel/2/level=-1.0 (decrease value)
/eos/wheel/2/level=4.0 (increase value rapidly)
(defaults to Coarse mode, but wheel mode can be
changed with the /eos/wheel command below)
/eos/wheel/<index> number for wheel mode: 0=coarse, 1=fine /eos/wheel=1.0
Parameter wheelsand encoders
number for wheel ticks (positive or neg-
ative)
/eos/wheel/pan=1.0
/eos
/
whe
el
/<pa
r
ameter
1>/
<parameter 2>/...
number for wheel ticks (positive or neg-
ative)
/eos/wheel/pan/tilt=1.0
/eos
/
whe
el
/f
ine
/<pa
r
ame
t
er
>
number for fine wheel ticks (positive or
negative)
/eos/wheel/fine/pan=1.0
To Next Page
Loading...
Need help?
General
