ETC Element - Deleting Cues

Working with a Cue List 229
To add a note to a cue:
•
[Cue] [n] {Attributes} {Notes}
To add a note to the currently selected cue, you can use [Shift] & [Label].
You can use the virtual alphanumeric keyboard or an external keyboard to enter the desired
text.
See Copy To and Move To for Labels, Scenes, and Notes (on page255) for more information.
Scenes
Scenes are a cue organization tool that provide a visual identifier for breaks in your show.
Scenes allow for quick cue list navigation without needing to remember a cue's number.
Scenes display in the cue list index and the playback status display as a green bar above the cue
they are associated with in the list. An end of scene can also be created, and those display as a
green bar under their associated cue.
Creating a Scene Break
You can add a scene break by using the {Scene} softkey. For example, [Cue] <1 > {Attribute}
{Scene} will add a scene to cue 1.
The virtual alphanumeric keyboard will open. You will need to label the scene before it is
created.
See Copy To and Move To for Labels, Scenes, and Notes (on page255) for more information.
Creating a Scene End
You can specify where a scene ends by using the {Scene End} softkey. For example, [Cue] <5 >
{Attribute} {Scene End} will add a scene end to cue 5.