ETC Element - Storing and Using Macros

Using About 329
•
the number of cues the palette is used in
•
the number of presets the palette is used in
•
the number of channels
•
the first cue the palette is used in
•
the last cue the palette is used in
{Usage} displays the following information about palettes:
•
Number of cues that move
•
List of channels that use the palette in a cue
•
List of channels stored in the palette that are not used in a cue
•
List of cues in which the palette have a move instruction
•
List of effects that use the palette
•
List of presets that the palette is stored in
[About] Presets
When a preset is selected, the following information will be displayed:
•
the number of channels
•
the first cue the preset is used in
•
the last cue the preset is used in
{Usage} displays the following information about presets:
•
Number of cues that move
•
List of channels that use the preset in a cue
•
List of channels stored in the preset that are not used in a cue
•
List of cues in which the preset have a move instruction
•
List of effects that use the preset
[About] Color Path
The following information will be displayed when a color path is selected:
•
The color path number
•
Label (if any)
•
Channels that use the color path
•
Cues that have moves that use the color path
See Color Path (on page162) for more information.
[About] Live
Pressing [Live] while holding [About] will display currently active DMXvalues, instead of a
percentage value.
Double-tapping [Live] while holding [About] will latch this view. Press [About] to disable it
again.
Note: An asterisk after levels indicates that fixture is patched outside of your current
partition, or above the current allowed output count.