ETC Element - Browser

System Basics 23
[Label] [Label] when appended to a record target command, clears the current label. This
includes show file labels.
Editing Labels
The page arrow keys on the console or an external alphanumeric keyboard can be used to move
the cursor within a label to aid in editing.
•
[Page p] - takes the cursor to the beginning of the label.
•
[Pageq] - takes the cursor to the end of the label.
•
[Paget] - moves the cursor to the left.
•
[Pageu] - moves the cursor to the right.
Browser
The browser is the interface for numerous functions including saving a show, loading a show,
opening displays, and many other functions. Press [Displays] to open the browser. See Using the
Browser (below) .
To learn more about saving and loading a show file, see About Managing Show Files (on
page70) for more information.
Using the Browser
To use the browser, you must first draw focus to it by touching anywhere in the browser area of
the CIA. If the browser is not visible, pressing [Displays]>{Browser} will bring up the browser.
When focus is on the browser, the window border highlights in gold. The paging keys will now
control selection in the browser.
•
Use the page arrow keys to move the selection bar up and down the list. You may also use
the level wheel to scroll through the list.
•
When the bar highlights the desired menu, press [Page u] to open the menu.
•
Continue pressing [Page u] to open submenus.
•
Scroll to the item you wish to open using [Page p]or [Page q] and then press [Select] or
double click on it. You may also touch the item you wish to open and then press [Select] or
double tap.
•
If you wish to close a submenu scroll to that item and press [Page t].
•
Additional presses of [Displays] will minimize or restore the CIA.
•
To draw focus to the browser at any time, press any area within it or press the [Displays]
button.
Note: File folders display with a folder icon beside their name.